LUVOCOM 3F PPS CF 9938
High-performance polyphenylene sulfide carbon fiber filament offering exceptional strength, heat resistance, and dimensional stability.
Name :
[PSCF-175BLCK-00500] LUVOCOM 3F PPS CF 9938 (1.75mm, 500 gram)SKU :
PSCF-175BLCK-00500EAN :
8720629067285Luvocom 3F PPS CF 9938 BK Filament is a PPS with 15% added carbon fibers. This filament exhibits exceptional heat- and chemical resistance. Printed parts will not dissolve in any solvent below 200°C. Printed parts are strong and stiff. Luvocom 3F PPS CF 9938 BK is a true high performance filament for serial production of end-use parts. You will achieve similar mechanical properties as injection molded PPS CF parts. LUVOCOM 3F PPS CF 9938 BK is railway-compliant according to EN 45545 (R22/R23, HL1–HL3) and meets UL94 V0 flammability standards. Read more about flame-resistant railway materials in this blog.
Key Features
- Insoluble in any solvent or chemical
- UL-94 V-0 flame retardant rating
- Complies with UN-ECE R.118.03
- Complies with EN 45545
- EN 45545 (fire behaviour of materials in trains)
Suitable Applications
- High performance end-use parts
- Replacement parts in vehicles
- Electronics and electrical components
- Coatings and housings for chemicals
General printing guidelines *
| Nozzle size: ≥ 0.4mm | Layer height: ≥ 0.10mm | Experience level: Expert |
| Print temp: ± 295 – 345° C | Fan speed: 0 – 25% | Drying: 4-6h @80°C (max) |
| Heat bed: ± 100 – 120° C | Enclosure needed: Required | Adhesion: EasyFix Nr. III |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these parameters if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
Abrasiveness
Please be aware that this 3D printing filament contains a relatively high concentration of extremely hard carbon fibers, which have an abrasive nature. In general these carbon fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use nozzles from stainless steel or other hardened alloys.
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.