Contains more than 50% recycled content
Good surface quality
Rough and matt surface finish with fine detail
Easy to print at high printing speeds
Warp-free printing and improved flowing behaviour
Excellent first layer adhesion to several (un)heated print surfaces
Compatible with AquaSolve PVA for complex multi-extrusion 3D printing
Wide variety of matt PLA colours
Complex educational projects and models
Manufacturing and visualization aids
Matt PLA is modified with fillers that can have an abrasive effect on brass nozzles. We recommend to use hardened steel nozzles when 3D printing with Matt PLA.
More than 50% recycled content
FormFutura Matt PLA filament contains more than 50% recycled post-industrial PLA content sourced from the waste streams that arise during the extrusion or our EasyFil PLA filaments. Because of its high recycled content, Matt PLA filament is not made from a virgin natural PLA compound, but from a homogeneous compound made from a wide variety of colors from collected filament extrusion waste. Homogeneous compound runs can vary in color intensity. This may result in lighter or darker 3D printing filament colors extruded from various homogeneous compound runs. On average two to three homogeneous compound runs are made per year.
Mat PLA Stealth White and Stealth Black will always have the same color as extrusion waste from black and white PLA filament is collected separately.
General printing guidelines *
|Nozzle size: ≥ 0.15mm||Layer height: ≥ 0.10mm||Experience level: Beginner|
|Print temp: ± 215 - 230° C||Fan speed: 50-100%|
|Heat bed: ± 50 - 60° C||Enclosure needed: No|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 1.4 g/cc||50 gr coil||0.75 Kg spool||2.3 Kg spool||4.5 Kg spool||8 Kg spool|
|Ø 1.75mm||± 15.1m||± 226m||± 693m||± 1356m||± 2410m|
|Ø 2.85mm||± 5.7m||± 85m||± 261m||± 511m||± 909m|
Product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant to below-listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.
Specifications for Matt PLA
|Color||Aircraft Grey Camouflage or Blue Camouflage or Dark Green Camouflage or Desert Sand Camouflage or Earth Red Camouflage or Gunmetal Grey Camouflage or Olive Camouflage or Purple Camouflage or Stealth Black or Stealth White or Urban Grey Camouflage|
|Diameter||1.75mm or 2.85mm|
|Weight||750 gram or 250 gram or 2300 gram or 4500 gram or 8000 gram|