Galaxy PLA - Value Pack
Galaxy PLA is a deep metallic coloured PLA range - based on our EasyFil PLA compound - with an incredibly high amount of silver aluminium-flakes added. The high added aluminium-flake content gives a beautiful sparkling, reflecting and glittering finish to Galaxy PLA printed objects.
Extremely glittering & shimmering surface finish
3D print objects without visible layers
Not abrasive to the nozzle of 3D printers
Incredibly deep coloured 3D printer filament
Very easy to print
Warp-free printing and no deformation after cooling
Improved flowing behaviour and inter-layer adhesion
Good first layer adhesion to several (un)heated print surfaces
General printing guidelines *
|Nozzle size: ≥ 0.15mm||Layer height: > 0.1mm||Flow rate: ± 100%|
|Print temp: ± 210 - 235° C||Print speed: Medium||Retraction: Yes ± 5mm|
|Heat bed: ± 0 - 60° C||Fan speed: 50-100%||Printing surface: Blue Tape / Glass|
|Enclosed printer needed: No||Heated Build Chamber: No||Experience level: Beginner|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 1.24 g/cc||50 gr coil||0.75 Kg spool|
|Ø 1.75mm||± 16.8m||± 251m|
|Ø 2.85mm||± 6.3m||± 95m|
Product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant to below listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
Specifications for Galaxy PLA - Value Pack
|Diameter||1.75mm or 2.85mm|