Important key features
3D printing resin with ABS-like strength and stiffness.
Improved impact resistance.
An engineering resin with excellent machinability properties.
Good compatibility with all SLA, DLP and LCD / MSLA 3D printers in the range of 385 – 420nm.
Manufacturing strong and stiff prototypes.
Suitable for creating tooling parts, jigs and fixtures.
Perfect for producing mechanical and operational replacement parts.
Excellent for snap-fit assemblies.
Perfect for short-run manufacturing
Physical properties after post curing
Please note that the above-displayed values can vary with individual machine processing, post-curing parts, geometry, print orientation, print settings, and temperature.
Specimens have been post-cured for 30 minutes with 200W and 405nm UV LED conditioned for 72 hours at 23°C and 50% humidity.
Preparation(s) before starting to print
Shake the bottle for at least 2 minutes before each use.
After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
The resin can be poured back from the vat into the bottle once your print is finished
Always use protective measurements like safety glasses and nitrile gloves when handling resins.
We do advise you to post-process your 3D print in order to achieve the material properties
Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes
An ultrasonic cleaner is preferred/recommended
Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing
Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes
Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C
The preferred curing wavelength is between 300-410nm
Note: The Print will come out very yellow-ish / bright yellow, this will fade over time when exposed to uv light from outside/inside. (this is called Photo Bleaching).
Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.
Always wear Respiratory Protection when sanding/cutting the resin object.
Always use nitrile gloves when handling resins and uncured resin objects.
Anycubic Photon Mono SE
First / Burn-in Layers:6x to 8x 50 to 55 Seconds
Normal Layers: 3.5 to 4.5 Seconds
Lifting Distance: 6mm
Bottom Lift Distance: 8mm
Light-off Delay: 0.5 to 1 Second(s)
Bottom Light-off Delay: 1 to 1.5 Second(s)
Phrozen Sonic Mini 4k
First / Burn-in Layers:4x to 6x 45 to 55 Seconds
Normal Layers: 7 to 8 Seconds
*If you need the best settings for your 3d printer we highly recommend using the included RERF (Resin Exposure Range Finder) or Resin Exposure Calibration Tool.
This is most likely included with the 3d printer usb stick and or manual.
Product export information
|HS Code: 29161400||Description: Resin for 3D Printing||Country of origin: European Union|
Specifications for Engineering LCD Resin – Impact 71D