Dental LCD Series - Model Resin
High-resolution 3D printing with fine detail
Almost Odorless processing
Excellent dimensional accuracy and low shrinkage
Gypsum-like texture and color
Temperature resistant for dental aligner production
Compatible with all open source LCD and DLP 3D printers in the range of 385 - 420nm
Models of dentures
Crown and bridge models
Models of gums
Resin properties (uncured liquid)
Viscosity: 700 cps at 25°C
Density: 1.18 g/cm2
Test method on post cured objects through 30 minutes high power LED curing.
Glass transition temperature (Tg)
Impact strength (IZOD notched)
Elongation at break
Shore D Hardness
Please note that the above-displayed values can vary with individual machine processing, post-curing parts, geometry, print orientation, print settings, and temperature.
Preparation(s) before starting to print
Shake the bottle for at least 2 minutes before each use.
After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
The resin can be poured back from the vat into the bottle once your print is finished
Always use protective measurements like safety glasses and nitrile gloves when handling resins.
General printing guidelines
Burn-in layers: 2x 170 sec
Base layer curing times at 50 microns: ±14 - 17 sec
We do advise you to post-process your 3D print in order to achieve the material properties
Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes
An ultrasonic cleaner is preferred/recommended
Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing
Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes
Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C
The preferred curing wavelength is between 300-410nm
Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.
Always wear Respiratory Protection when sanding/cutting the resin object.
Always use nitrile gloves when handling resins and uncured resin objects.
Product export information
|HS Code: 2916140090||Description: Resin for 3D Printing||Country of origin: the Netherlands|
Specifications for Dental LCD Series - Model Resin
|Color||Model or Gypsum White|