CleasScent ABS (methylmethacrylate acrylonitrile butadiene styrene) combines good mechanical properties and translucency into a 3D printer filament that is easy to process
with limited warping and limited styrene smell. ClearScent ABS exhibits resistance to various chemicals and complies with UL 94 HB flammability standards.

Key features

  • Translucent ABS filament
  • 90% light transmittance with 2.2% haze
  • UL 94 HB flammability rating
  • Good chemical resistance
  • Limited warping and styrene smell when being 3D printed
  • Compatible with Helios Support for complex multi-extrusion 3D printing
  • Post-processing with acetone, tetrahydrofuran (THF) and other analogous solvents

 

Applications

  • Household tools
  • Electronic goods
  • Frames and panels
  • Custom components
  • Short-run manufacturing

 

General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Experience level: Beginner
Print temp: ± 245 – 265° C Fan speed: 0-30%
Heat bed: ± 90 – 100° C Enclosure needed: Recommended

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 106 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool
Ø 1.75mm ± 19.6m ± 294m ± 902m ± 1765m ± 3138m
Ø 2.85mm ± 7.4m ± 111m ± 340m ± 665m ± 1183m

 

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

 

Compliance *

This filament is compliant to below-listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Technical Datasheet:

Safety Datasheet:

ClearScent ABS

ClearScent ABS is a translucent MABS type of 3D printer filament that is easy to 3D print with limited warping and styrene smell. This filament features translucency with good mechanical properties.

1.75
2.85
Black
White
Clear
Transparent Dark Blue
Transparent Red
250
750
SKU: ClearScent ABS Tags: , , ,

ClearScent ABS

ClearScent ABS is a translucent MABS type of 3D printer filament that is easy to 3D print with limited warping and styrene smell. This filament features translucency with good mechanical properties.

1.75
2.85
Black
White
Clear
Transparent Dark Blue
Transparent Red
250
750

If a product is out of stock, it is usually replenished within two weeks.

SKU: ClearScent ABS Tags: , , ,

CleasScent ABS (methylmethacrylate acrylonitrile butadiene styrene) combines good mechanical properties and translucency into a 3D printer filament that is easy to process
with limited warping and limited styrene smell. ClearScent ABS exhibits resistance to various chemicals and complies with UL 94 HB flammability standards.

Key features

  • Translucent ABS filament
  • 90% light transmittance with 2.2% haze
  • UL 94 HB flammability rating
  • Good chemical resistance
  • Limited warping and styrene smell when being 3D printed
  • Compatible with Helios Support for complex multi-extrusion 3D printing
  • Post-processing with acetone, tetrahydrofuran (THF) and other analogous solvents

 

Applications

  • Household tools
  • Electronic goods
  • Frames and panels
  • Custom components
  • Short-run manufacturing

 

General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Experience level: Beginner
Print temp: ± 245 – 265° C Fan speed: 0-30%
Heat bed: ± 90 – 100° C Enclosure needed: Recommended

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 106 g/cc 50 gr coil 0.75 Kg spool 2.3 Kg spool 4.5 Kg spool 8 Kg spool
Ø 1.75mm ± 19.6m ± 294m ± 902m ± 1765m ± 3138m
Ø 2.85mm ± 7.4m ± 111m ± 340m ± 665m ± 1183m

 

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

 

Compliance *

This filament is compliant to below-listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Technical Datasheet:

Safety Datasheet: