ReForm rTPU 95A is our stiffest and medium flexible rTPU filament in our ReForm rTPU product line. This recycled TPU filament is a perfect balance between rubbery and rigid plastics. ReForm rTPU 95A is perfect for applications where you want tough, durable, abrasion-resistant parts that can still flex a little but won’t collapse under load.
ReForm rTPU 95A is ideal for producing functional and load bearing parts that require resistance to wear, tear, abrasion, and friction. Your 3D printed parts will perform reliably under the most demanding conditions and continuous mechanical stress.
ReForm rTPU 95A is also manufactured using almost 100% post-industrial recycled TPU, sourced responsibly from European chemical industries. By reclaiming overproduction, off-grade materials, and production waste, and enhancing them with tailored additives, we deliver a high performance recycled TPU filament optimized for 3D printing applications. This makes ReForm rTPU 95A the eco-friendly alternative to virgin TPU filaments, delivering the same premium quality while reducing environmental impact.
Important key features
- Made with nearly 100% recycled TPU from certified and traceable European sources.
- Medium-flexible and moderate elasticity with a shore hardness of 95A.
- Good flexibility with dimensional stability - can flex and compress under load but springs back reliably.
- High abrasion resistance - very resistant to wear, scuffing, and repeated friction.
- Strong Mechanical Properties - high tear strength and impact resistance.
-
Printed parts can withstand repeated mechanical stress without cracking.
Suitable applications
- Gears and drive belts – parts can withstand wear while maintaining slight flexibility.
- Housings, connectors, cable grommets – printed parts resist mechanical stress but provide some give.
- Jigs and fixtures – parts that need to bend slightly but remain dimensionally stable.
-
Automotive applications – Dust covers, bellows, flexible mounts, cable management components.
-
Sports & lifestyle equipment – wheels, grips, protective gear that need abrasion resistance.
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Adhesive: EasyFix Nr. I |
| Print temp: ± 220 – 250°C * | Fan speed: 30 – 100% | Drying: 24 hours @ ~50-70°C |
| Heat bed: ± 60 – 80°C * | Enclosure: Not necessary | Drybox: Yes |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*)When using high speed printing, the above displayed settings will likely need to be adjusted accordingly.
Specifications
Material properties
Specific Gravity(23°C)
Mechanical properties
Tensile strength
Tear strength
Elongation at break
Shore A hardness
Thermal properties
Heat resistance
Melting Point
Typical value
1.21 g/cm3
32 MPa
77 N/mm
355%
95A
74°C
165°C
Test Method
ISO 1183-1
ASTM D638
ISO 34-1
DIN 53504-S2
ISO 7619-1
DSC
-
Storage and handling
Filament should be stored at room temperature in a dry and dark place with humidity below 15%. Recommended storage temperature is ca. 18-25°C (64.4 -77.0°F). Keep out of moisture, sunlight and direct heat. When stored properly, product has a shelf life of 24 months. To obtain the best parameters of the printed object, it is recommended to dry the material prior to usage and to 3D print it directly from a dry box.
Product export information
| HS Code: 39169090 | Description: Monofilament for 3D printing | Country of origin: European Union |
Compliance
This filament is compliant to below listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available, and applies only for the above described products.