FlexiFil™ filament is a rubber-like 3D printer filament which allows you to print flexible objects, such as rubber machine parts, soft toys, flip-flops, and other rubbery items. FlexiFil™ opens doors to a whole new field of application when it comes to desktop 3D printing. It’s up to your own imagination what you would like to create and print. FlexiFil™ is a flexible Thermoplastic Co-Polyester 3D printer filament with a Shore hardness of 45D.
FlexiFil™ is a revolutionary new rubber-like high-performance Thermoplastic Co-Polyester (TPC) filament. FlexiFil™ has unique flexural strength properties, as 3D printed objects with FlexiFil™ will have a “flexural memory”, allowing objects to return back to their original position after being bent, dent, or folded.
FlexiFil™ is not only a flexible filament. It has quite some more remarkable characteristics. FlexiFil™ is a high-performance TPC that offers a unique combination of flexibility, high temperature resistance, strength, and an excellent UV resistance and good resistance to chemicals. The combination of above features make FlexiFil™ a unique filament in its kind.
FlexiFil™ filament is a BIO-performance TPC with a substantially reduced carbon footprint compared to typical Co-Polyester 3D printer filaments, as FlexiFil™ is partially made out of renewable carbon content, such as bio-based oils.
Unique features of FlexiFil™ filament
Very flexible / Flexural memory
Good resistance to chemicals
Excellent UV resistance
Long term heat resistant
The Charpy Notched Impact Strength Test method indicates “No Break” for FlexiFil™, meaning that FlexiFil™ will not deform, or break when stressed by bending.
Product Specifications FlexiFil™ filament has a great roundness and very tight diameter tolerances. This flexible TPC 3D printer filament is spool-wrapped on a polystyrene plastic spool with 500 grams of filament.
Filament Net Weight:
0.5 Kg ± 2%
Spool Size (D x h):
200 mm x 55 mm
Spool Hub Diameter:
Carton Box Size (L x W x H):
220 mm x 220 mm x 70 mm
For more technical specifications about our FlexiFil™ 3D printer filament, please have a look at the 'SPECIFICATIONS' tab.
General Tips & Tricks for printing with FlexiFil™ It is recommended to significantly lower your printing speed (compared to printing with PLA, or ABS) when printing with FlexiFil™. The guideline for an optimal printing temperature is to print at approximately 210°C. The recommended heated bed temperature varies between ± 60˚C and ± 100˚C. Various other options (also without heated bed) are possible depending on the type and size of the object to be printed.
In order to get a good first layer adhesion it is important that your print bed is really level and clean. Depending on the printer it can also help to use a glue stick to improve the first layer adhesion. A combination of Blue Tape, like Eurocel Blue Masking Tape, and glue stick can also do wonders.
The flexibility/rubbery characteristics of FlexiFil™ can cause some friction in the printer’s bowden tube, resulting in unstable feeding process of the filament into the extruder. As a remedy one can use a tiny bit of lubricant – like WD40 – in one’s bowden tube in order make sure there won’t be any friction.
Please do keep in mind that above recommendations are only guidelines and that every desktop 3D printer requires different settings for optimal printing results.
As FlexiFil™ is a relatively new 3D printer filament we would like to receive as many feedback as possible with respect to user experience and optimal printer settings for as many desktop 3D printers as possible. We can then compile a “tips & tricks” document for a wide range of desktop 3D printers to share with our fellow 3D printing enthusiasts.
So, we would like to ask you to tweak around with your printer settings and please do share your experiences with us. We will be very grateful for your input!
White (RAL ±9010)
Filament Net Weight:
± 0.5 Kg
± 0.05 mm
Print Temperature Guideline:
220 - 260° C
Glass Transition Temperature:
Ovalidity Tolerance (max):
Print Speed Guideline:
10 - 20 mm/s
Craft3D Design Posted on 14 September 2015 at 09:53
Following the general settings at 210 Degrees Hotend and 60 Degrees Heated Bed + the brilliant advice not to touch it with bare hand I got perfect prints from the first try. No warping, no adhesion problems whatsoever. I am using BuildTak as a printing surface though and I find it is a huge difference comparing to Kapton tape . I printed a 6x6 cm x 1.5mm thick object and it is flawless...even better than the PLA :D Definitely worth a try
Radim Posted on 31 March 2015 at 17:01
I am using Makerbot replicator 2. Blue painters tape on the board. I would like to suggest 2 tricks.
1. I am printing usually with raft. Flex was not able to stick on blue painters tape, thats why I am printing raft from any normal PLA I have, and then change PLA by FLEX, and it works really great.
2. Beware of touching FLEX by your hands. I had a problem, that feeding stops randomly. I had found, that this is causing grease
from my hands o filament. I had washed out Filament with degreaser (any dishes degreaser), and this feeding problem has gone.
Hope this will be useful for any others.
Anyway, this is really great and amazing product.
Nino Posted on 31 March 2015 at 15:55
Fun filament to print small things but this is not for the beginners, the filament is verry hard to print