EasyWood™ looks, feels and smells like real wood. EasyWood™ is a unique mixture of 40% grinded wood particles in combination with the modified and proven easy-to-print binding polymers used for our EasyFil™ filaments. This extraordinary blend has resulted in a high-end and unsurpassed “easy to print” wooden filament.
Because of its low shrinkage factor, EasyWood™ is nearly warp-free and therefore EasyWood™ will not deform after cooling. Due to its low tendency to warp EasyWood™ can be printed without a heated print bed. If your printer is however equipped with a heated print bed we recommend to set your heat bed temperature to ± 35° to 60°C.
EasyWood™ prints best at a printing temperature range within 200°C and 240°C. Printing with EasyWood™ is remarkable easy, as it is a very easy to process material and an excellent first layer adhesion can be obtained by printing at various undergrounds without needing a heated print bed.
Next to its “easy to use” features, our Formfutura EasyWood™ filament range has an excellent roundness and very tight diameter tolerances, which makes this filament a perfect match with all common desktop 3D printers. Printing with EasyWood™ 3D printer filament will go very smoothly with basically all FFF/FDM technology based desktop 3D printers, such as:
Our EasyWood™ does not contain any hazourdas, or chemical substances. As a matter of fact our EasyWood™ filaments are RoHS certified and REACH compliant. Post-processing possibilities You can obtain a beautiful wood-nerve structure in your EasyWood™ printed objects by post-processing your print by grinding it a little bit with a piece of fine grit sandpaper. By grinding your printed object a bit you will highlight the relief, or rough edges/surfaces, of your printed object with different shades of the brown greenish wood colour.
Post-processing with sandpaper will have the biggest effect on rough surfaced EasyWood™ 3D printed objects.
Product details Our EasyWood™ 3D printer filament is wrapped on a transparent ABS plastic spool which contains approximately 0.5kg of filament. Our spool-wrapped EasyWood™ filaments are packed in a silica sealed bag and come in a full colour printed cardboard box, which in turn is also shrink-wrapped in plastic. Please see below for more details with respect to the weight and packaging of our spool-wrapped EasyWood™ 3D printer filaments:
Filament Net Weight:
± 0.5 Kg
Spool Size (D x h):
200 mm x 55 mm
Spool Hub Diameter:
Carton Box Size (L x W x H):
200 mm x 200 mm x 60 mm
For more technical specifications about our EasyWood™ 3D printer filament, please have a look at the 'SPECIFICATIONS' tab.
General Tips & Tricks for printing with EasyWood™ filaments The printing temperature guideline for printing with our EasyWood™ filament is approximately 200-240°C. As each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to get the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height.
EasyWood™ has similar thermal properties to our EasyFil™ PLA. Therefore it can be printed both with and without a heated print bed. However, if your desktop 3D printer does have a heated print bed it is recommended to set your print bed temperature to approximately 35° to 60° C.
A good first layer adhesion is of the utmost importance in obtaining the best results for your prints. Firstly make sure that you print bed is accurately levelled and clean. EasyWood™sticks really well to an unprepared print bed. If you would however like to improve your first layer adhesion, then we recommend to prepare your print bed with Eurocel Blue Masking Tape. EasyWood™ sticks extremely well to this masking tape. Preparing your print bed with Eurocel Blue Masking Tape will not only get your EasyWood™ print to stick like a charm to your print bed, it will also allow you to remove your printed object easily from your print bed.
Filament Net Weight:
± 0.5 Kg
EasyWood™ - Birch
± 0.05 mm
Print Temperature Guideline:
215° C ± 5° C
Glass Transition Temperature:
Ovalidity Tolerance (max):
Print Speed Guideline:
40 - 100 mm/s
Hugo Thirion Posted on 21 March 2017 at 13:34
First of all I'd like to thank FormFutura for giving me the opportunity to perform my student project and for sending me a coil of this filament.
I have got to say that this material is really nice to print with and has interesting physical properties. It's effort resistance is quite impressive for a wooden-based filament since it can be as strong as ABS in certain cases while still having PLA flexibility. It is possible to create a all-purpose piece by simply modelling it with a decent toughness and a alveolus internal structure.
Prining with this also has an aesthetical aspect. Even if your printer is set to make not so thin layers you can end up with a wood-lookalike creation, and the sandy sensation added to the material makes you think you're touching soft plank. It's quite pleasant :)
I'm very satisfacted with this and the multiple color choices allows to imagine a whole bunch of things.