This Eurocel PET Tape is a siliconic based polyester tape, which has an excellent adhesion to the (heated) platform of any desktop 3D printer. Because of its high thermal resistance this Eurocel PET Tape creates an ideal surface for 3D prints where a heated printbed is required. After printing your printed objects can easily be removed from this tape.
Our Eurocel PET Tape has a thickness of 0.093mm and it comes in a very convenient width of 50mm. This ensures that taping your print bed with this PET tape is only a matter of seconds. One roll of Eurocel PET Tape contains 66 metres of tape.
Good adhesion level to (heated) platform
High thermal resistance (Max. 190°C)
3D prints stick very well to the surface/texture of this tape
Prints can easily be removed from the surface of this tape
Easy removal without adhesive residue
Removable without breaking
General Tips & Tricks
A good first layer adhesion is of the utmost importance in obtaining the best results for your prints. Prints, where a heated bed is required, stick really well to this Eurocel PET Tape.
This Eurocel PET Tape comes in a convenient width of 50 millimetres, so you only need a couple of strokes for taping your entire print bed. When preparing the print bed it is better to have tiny gaps between your strokes of masking tape, rather than having overlaps. Overlaps of smaller pieces of tape may cause difficulties later on during the print process.